Starting Your Gasoline Engine - GMC 1994 Yukon Owner's Manual

Table of Contents

Advertisement

NOTICE:
If your key seems stuck in "LOCK" and you can't turn it, be
sure it is all the
way
in. If it is, then turn the steering wheel left
and right while you turn the key hard. But turn the key only
with your hand. Using a tool to force it could break the key or
the ignition switch. If none of this works, then your vehicle needs
service.
Key Release Lever
The ignition key
cannot be removed
from the ignition of
manual transmission
vehicles unless the
key release lever is
used.
To Remove the Key
On manual transmission vehicles, turn the key to the LOCK position while
pressing the key release lever down (see the caution earlier in this section
about the key release lever). Keeping your finger on the lever, pull the key
straight out.
On automatic transmission vehicles, turn the key to LOCK and pull it
straight out.
Starting Your Gasoline Engine
If you have a diesel engine, see "Starting Your Diesel Engine" in the Index.
Engines start differently. The 8th digit of your Vehicle Identification
Number (VIN) shows the code letter or number for your engine. You will
find the VIN at the top left of your instrument panel. (See "Vehicle
Identification Number" in the Index.) Follow the proper steps to start the
engine.
2-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

1994 suburban

Table of Contents