Lap-Shoulder Belt
The positions next to the windows have lap-shoulder belts. Here's how to
wear one properly.
1. Pick up the latch plate and pull the belt across you. Don't let it get
twisted.
2. Push the latch plate into the buckle until it clicks. If the belt stops
before it reaches the buckle, tilt the latch plate and keep pulling until
you can buckle
it.
Pull up on the latch plate to make sure it is secure.
If the belt is not long enough, see "Safety Belt Extender" at the end of
this section.
Make sure the release button on the buckle is positioned so you would
be able to unbuckle the safety belt quickly if you ever had to.
To make the lap part tight, pull down on the buckle end of the belt as
you pull up on the shoulder part.
1-29