Canon PRO-6000 Online Manual page 805

4910
Cause
The width of the roll paper set in Fit Roll Paper Width in the printer driver is not the same as the width of
the roll paper loaded in the printer.
What to Do
Tap OK on the touch screen to go to the next screen.
Check the media type and size that appear and tap OK.
• Printing without changes
Tap Print with the loaded paper. on the touch screen.
However, note that this error may cause paper jams and affect the printing quality.
• Stopping printing
Tap Cancel on the touch screen to stop printing.
• Replacing the roll paper
Follow the steps below to replace the paper with roll paper of the width set in the printer driver.
1. Tap Replace the paper and print on the touch screen, then remove the roll paper.
Removing the Upper Roll from the Printer
Removing the Lower Roll from the Roll Unit
Removing Rolls From the Roll Holder
2. Replace the paper with paper of the width set in the printer driver.
Loading Rolls on the Roll Holder
Loading the Upper Roll on the Printer
Loading the Lower Roll on the Roll Unit
Printing begins.
Note
• To change print settings in Windows, select Fit Roll Paper Width in the printer driver and set the roll
paper width in the dialog box that appears.
• To change print settings in Mac OS, open the printer driver and select Fit Roll Paper Width, and
then set the roll paper width in that panel to the width of the paper loaded in the printer.
805