Canon PRO-6000 Online Manual page 114

9. Change the feed flap switch on top of the roll unit so that the switch indicator (A) is aligned
with ● (B) position on the take-up icon.
10. Change Inward/Outward Winding Changeover switch on roll unit to desired winding
direction.
Note
• For the winding direction of the roll paper, you can select either outward winding to make the
printed surface on the outside of the roll or inward winding to make the printed surface on the
inside of the roll.
11. Follow these steps to secure the leading edge of the roll paper to the paper core with tape.
• If message appears on touch screen to confirm whether or not to advance paper automatically so
it can be secured with tape
114