Casio WSD-F20X User Manual page 72

Chemicals
Do not allow your watch to come into contact with thinner, gasoline,
●
solvents, oils, or fats, or with any cleaners, adhesives, paints, medicines,
or cosmetics that contain such ingredients. Doing so can cause
discoloration of or damage to the resin case, resin band and other parts.
Storage
If you do not plan to use your watch for a long time, thoroughly wipe it free
●
of all dirt, sweat, and moisture, and store it in a cool, dry place.
Disconnect the charger cable from the AC adaptor and unplug the AC
●
adaptor from the power outlet when not charging. Store them in a safe place
for later use. The charger cable is magnetic, so keep it away from magnetic
cards, precision equipment, and analog watches.
Resin Components
Allowing your watch to remain in contact with other items or storing it
●
together with other items for long periods while it is wet can cause color on
resin components to transfer to the other items, or the color of the other
items to transfer to the resin components of your watch. Be sure to dry off
your watch thoroughly before storing it and make sure it is not in contact
with other items.
Leaving your watch where it is exposed to direct sunlight (ultraviolet rays)
●
for long periods or failure to clean dirt from your watch for long periods can
cause it to become discolored.
Friction caused by certain conditions (strong external force, sustained
●
rubbing, impact, etc.) can cause discoloration of painted components.
If there are printed figures on the band, strong rubbing of the printed area
●
can cause discoloration.
Daily use and long-term storage of your watch can lead to deterioration,
●
breaking, or bending of resin components. The extent of such damage
depends on usage conditions and storage conditions.
Watch Sensors
A watch sensor is a precision instrument. Never try to take it apart. Never
●
try to insert any objects into the openings of a sensor, and take care to
ensure that dirt, dust, or other foreign matter does not get into it. After using
your watch where it has been immersed in saltwater, rinse it thoroughly with
fresh water.
EN-71