MOMENT SETTER Notification Function
On the "START" Screen, you can tap
MOMENT SETTER settings that control how notifications of useful
information are provided to you while engaging in an activity. For details, see
"Using the MOMENT SETTER
Data Displayed During Measurement Operations
Note the points below concerning the data displayed while a measurement
operation is in progress.
For information about procedures to calibrate the barometric pressure and
●
altitude values displayed by the Activity app to make them more accurate,
read
"Common Outdoor Function
items:
"Barometric Pressure
"Correct Altitude Using
Since speed and distance traveled are measured using the watch's or your
●
smartphone's GPS function, location measurement error may result in
measured value error.
Speed and distance are calculated at regular intervals, so there may be
●
some lag before values are displayed.
Hyphens (-) are displayed in place of the speed and distance readings when
●
the watch is unable to acquire location information (GPS).
Location information (GPS) acquisition is not supported while the WSD-F10
●
is connected with an iPhone, so hyphens (-) are displayed in place of the
speed and distance readings.
App".
Settings" and then refer to the following
Calibration",
Location".
EN-40
to display a screen for configuring
"Altitude
Calibration", and