Location Memory App Basic Operations
You can perform main Location Memory app operations using the TOOL button and
APP button. The operations you can perform with these two buttons are indicated by
on-screen icons displayed to the left of each button. You can also perform the
operations by tapping the icons.
Icon
Changes the functions of the two buttons to zoom in and zoom out
(see below).
Changes the functions of the two buttons to mark and dictation (see
below).
Zooms in on the map.
Zooms out from the map.
Records a memo with a mark.
Records a dictated memo.
"Revisit" Marks
Use "Revisit" marks to record a memo and have the watch alert you with a
notification whenever you are in the vicinity (within 5 km under initial default
settings). For information about changing the notification distance setting and
disabling notification, see
Important!
In order to be able to receive notifications triggered by "Revisit" marks, your
●
Android phone must have the CASIO MOMENT SETTER+ app installed,
and there must be a connection between the phone and watch.
Note that notification receipt triggered by "Revisit" marks is not supported
●
when the watch is connected with an iPhone.
You can have up to 50 "Revisit" marks registered at one time. Adding a new
●
Revisit mark while there are already 50 marks in memory will delete the
oldest one in memory to make room for the new one.
Pressing the button or tapping the icon does this:
"Changing the "Revisit" Mark Notification
EN-22
Setting".