Programming The Washing Time; Starting The Programme - Beko DIN16430 User Manual

OperatIng the product
Programming the washing
time
Time Delay
If an economical electricity tariff is applied
in your region, you can use the time delay
function to wash your dishes during
appropriate hours.
You can delay the start of the selected
programme until 9 hours.
C
Hold the delayed start key
pressed for 1 second more than
the other keys.
1. Press the time delay key after selecting
the washing programme and other
auxiliary functions.
2. Once you press the Time Delay key "3
hours" Time Delay indicator will start
flashing.
3. Set the desired time by pressing the
Time Delay key. Each press on the key
will increase up to 9 hours with 3-hour
increments.
4. Close the door of your machine after
setting the Time Delay. Once the delay
time is over, the selected programme will
start automatically.
C
The time delay will start
countdown with the closing of
the door after selecting the Time
Delay function.
C
If the door is opened while the
Time Delay function is active,
the countdown will be paused
and start icon will start to flash.
Changing the settings while Time
Delay function is active
While the Time Delay function is activated,
you cannot make changes in the washing
programme, auxiliary functions or the duration
of time delay.
/43 EN
28
C
Auxiliary functions cannot be
set after the programme has
started.
To cancel the time delay function
To cancel the process while the Time Delay
function is active the programme should be
canceled.
C
Time delay function cannot be
set after the programme has
started.

Starting the programme

Close the door of your machine to start it
after selecting the programme and auxiliary
functions.
C
Your machine performs water
softening depending on the
hardness level of the mains
water. Washing time can
change while the programme
is running depending on the
ambient temperature where
your machine is installed,
temperature of the supply water
and amount of the dishes.
C
Pay attention not to open the
door of the machine when it is
running. There may be a rush of
vapour when you open the door
of your machine; be careful.
C
After the rinsing step the
machine will wait silent in pause
mode for some time in order
to have the water remaining in
the machine and on the dishes
drained completely and to have
the water softener cleaned, and
then it will resume running in
drying mode.
Dishwasher / User's Manual