Gigabyte TRX40 AORUS XTREME User Manual page 49

& Power Loading
Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing
it to shutdown or fail. If this occurs, please set to Enabled. Auto lets the BIOS automatically configure this
setting. (Default: Auto)
& Resume by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.
Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
& Wake on LAN
Enables or disables the wake on LAN function. (Default: Enabled)
ƒ IO Ports
& Initial Display Output
Specifies the first initiation of the monitor display from the installed PCI Express graphics card.
Sets the graphics card on the PCIEX16_1 slot as the first display. (Default)
PCIe 1 Slot
Sets the graphics card on the PCIEX8_1 slot as the first display.
PCIe 2 Slot
Sets the graphics card on the PCIEX16_2 slot as the first display.
PCIe 3 Slot
Sets the graphics card on the PCIEX8_2 slot as the first display.
PCIe 4 Slot
& PCIEX16_1 Bifurcation
Allows you to determine how the bandwidth of the PCIEX16_1 slot is divided. Options: Auto, x16,
x4x4x4x4. (Default: Auto)
& PCIEX8_1 Bifurcation
Allows you to determine how the bandwidth of the PCIEX8_1 slot is divided. Options: Auto, x8, x4x4.
(Default: Auto)
& PCIEX16_2 Bifurcation
Allows you to determine how the bandwidth of the PCIEX16_2 slot is divided. Options: Auto, x16,
x4x4x4x4. (Default: Auto)
- 49 - BIOS Setup