Gigabyte TRX40 AORUS XTREME User Manual page 15

Step 6:
Push the carrier frame into place and you will hear
a "click" sound when it is pushed to the bottom.
Step 7:
Remove the CPU socket cap.
Step 9:
Close the metal load plate. With one finger press-
ing down on the load plate, begin tightening Screw
1 slightly. Then do the same to Screw 2 and Screw
3. Next, fully tighten the three screws. Make sure
the motherboard is placed on a stable surface
during the tightening process.
Warning! The CPU carrier frame cannot be
placed outside the rails.
Step 8:
After installing the CPU, use two fingers to push
down on the upper portion of the sides of the CPU
carrier frame to fasten the rail frame back to the
CPU socket.
- 15 - Hardware Installation