Storage Interface
ASMedia
-
2 x SATA 6Gb/s connectors (SATA3 8, 9), supporting AHCI mode only
USB
CPU:
-
4 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
Chipset:
-
2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
-
1 x USB Type-C
internal USB header
-
4 x USB 3.2 Gen 1 ports available through the internal USB headers
Chipset+1 USB 2.0 Hub:
-
4 x USB 2.0/1.1 ports available through the internal USB headers (with the
included front USB header extention cable)
Chipset+ASMedia
-
1 x USB Type-C
-
1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
Internal
1 x 24-pin ATX main power connector
2 x 8-pin ATX 12V power connectors
Connectors
1 x OC_PEG power connector
1 x CPU fan header
1 x water cooling CPU fan header
2 x system fan headers
3 x system fan/water cooling pump headers
2 x addressable LED strip headers
2 x RGB LED strip headers
4 x M.2 Socket 3 connectors
10 x SATA 6Gb/s connectors
1 x front panel header
1 x front panel audio header
1 x USB Type-C
2 x USB 3.2 Gen 1 headers
1 x USB 2.0/1.1 header
1 x GIGABYTE add-in card connector
1 x noise detection header
1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S
module only)
1 x power button
1 x reset button
2 x temperature sensor headers
2 x BIOS switches
Voltage Measurement Points
Back Panel
1 x Q-Flash Plus button
1 x Clear CMOS button
Connectors
2 x SMA antenna connectors (2T2R)
1 x USB Type-C
7 x USB 3.2 Gen 2 Type-A ports (red)
2 x RJ-45 ports
1 x optical S/PDIF Out connector
5 x audio jacks
SATA 6Gb/s Controller:
®
port with USB 3.2 Gen 2 support, available through the
™
USB 3.2 Gen 2 Controller:
®
port on the back panel, with USB 3.2 Gen 2 support
™
header, with USB 3.2 Gen 2 support
™
port, with USB 3.2 Gen 2 support
™
- 11 -
Hardware Installation