Page 2
INSTALLATION The toilet room itself Option A: 370 mm Option B: 415 mm The toilet can be placed anywhere you like; it does not need to have a particular room temperature. However, the composting process will be more rapid in a warmer room, as the microorganisms thrive in a warm environment.
Page 3
Option B – ventilation through the roof Priot to mounting the Installation Kit and Connection Kit are needed; these can be purchased from the place where the toilet was purchased. To install the ventilation pipe, loosen the two through screws MAX 45°...
Page 4
Bruksanvisning för MullToa User Manual for MullToa Käyttöohje MullToa...
Page 5
INSTALLATION What you need For installation you need to have the following tools available: – Electric drill – Hole saw (55 mm) or Compass saw – Saw – Measuring tool – Asphalt sealant/adhesive Also check that the floor area where the toilet is to be positioned is large enough. The floor area required is: Model 15,25 and 55 width 55 cm x length 110 cm (for the toilet and removal of the tray).
Page 6
Starting the empty toilet 1. Pour 2/3 of the bag of MullToa humus starter into the toilet and the whole bag, model 65. About half of the humus starter will fall through the grating into the tray. 2. Plug into an earthed socket. Open the lid and the motor will start automatically and run for a short while.
Need help?
Do you have a question about the Separera 30 and is the answer not in the manual?
Questions and answers