INSTALLATION INSTRUCTIONS FOR CONTEMPORARY FAÇADE KITS
INSTALLATION INSTRUCTIONS FOR CONTEMPORARY FAÇADE KITS
FOR USE WITH MERIT™ SERIES MLDVTCD-35 GAS FIREPLACES
FOR USE WITH MERIT™ SERIES MLDVTCD-35 GAS FIREPLACES
f i r e - p a r t s . c o m
Trim
TOOLS REQUIRED
1 - Phillips Screwdriver, 1 - 5/16" Nut Driver
GENERAL INFORMATION
The Contemporary Façade Kit is composed of three separate elements
that are purchased separately. Refer to Table 1.
NOTE: To complete one Façade a selection of one Base, one Frame and
one Façade Trim must be made.
The frame must be installed on a properly positioned MLDVTCD fireplace.
Refer to manual number 506015-03 for detailed instructions. Refer to
Figure 1 for façade significant dimensions.
NOTE: The fireplace must be positioned at least 18" up the wall to use
the co ntemporary façade
1
P506019-40
P/N 506019-40 Rev. A 05/2015
Frame
Base
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
50609-40
REV. N/C 04/2009
Choose One Base (Largest Piece Immediately Against The Finish Wall)
Cat. No.
Model No.
H7732
CDFBBK-35
H7733
CDFBSS-35
Choose One Frame (Inner Façade Frame Piece Surrounding The Opening)
H7730
CDFFBK-35
H773
CDFFSS-35
Choose One Trim (Finishes The Inner Frame Opening)
H7727
CDTKBK-35
H7728
CDTKSS-35
H7729
CDTKBR-35
Table 1
32"
Floor
Fireplace
Figure 1
IHP.US.com
HEARTH PRODUCTS
KITS AND ACCESSORIES
HEARTH PRODUCTS
KITS AND ACCESSORIES
CONTEMPORARY
CONTEMPORARY FAÇADE KITS
FAÇADE KITS
Contemporary Façade Kits
Description
Façade Base, Black
Façade Base, Stainless
Façade Frame, Black
Façade Frame, Stainless
Façade Trim, Black
Façade Trim, Stainless
Façade Trim, Polished Brass
35"
44-3/4"
35-/2"
29"
6"
8" Min. Required
> 28" Recommended
33"
24"
506019-40 A