Bluetooth (Navigation) - Chevrolet 2010 Equinox Owner's Manual

6-58 Infotainment System

Bluetooth (Navigation)

For information about how to
navigate the menu system using
the infotainment controls, see
Overview under Introduction,
in the Navigation supplement.
Bluetooth Pairing
To make calls with a Bluetooth cell
phone through your vehicle, it must
be paired to the vehicle's Bluetooth
system first and then connected
to the vehicle before it can be
used. Refer to the cell phone
manufacturer's user guide for
Bluetooth pairing instructions.
If a Bluetooth phone is off or not
connected, calls will automatically
be made using the OnStar
Hands Free Calling feature,
if available. Refer to the OnStar
owner's guide for more information
about OnStar Hands-Free Calling.
The pairing process can be started
by using the voice recognition
system or the controls on the
infotainment system.
Pairing Information:
Up to five cell phones can be
paired to the Bluetooth system.
The pairing process is disabled
when the vehicle is moving.
The Bluetooth system
automatically links with the
paired cell phone in the order
the phones are listed in the
device list.
Only one paired cell phone can
be connected to the vehicle's
Bluetooth system at a time.
®
Pairing should only need to be
completed once.
Pairing a Phone
1. Press the CONFIG hard key
repeatedly until the Phone menu
is shown or touch the Phone tab
on the screen.
2. Select the Bluetooth submenu.