Adding Washer Fluid - Chevrolet 2008 Tahoe Owner's Manual

Hide thumbs Also See for 2008 Tahoe:
Table of Contents

Advertisement

Adding Washer Fluid

Your vehicle has a low washer fluid message in the DIC
that comes on when the washer fluid is low. The
message is displayed for 15 seconds at the start of
each ignition cycle. When the WASHER FLUID LOW
ADD FLUID message displays, you will need to add
washer fluid to the windshield washer fluid reservoir.
Open the cap with the
washer symbol on it.
Add washer fluid until the
tank is full. See Engine
Compartment Overview on
page 5-14 for reservoir
location.
Notice:
When using concentrated washer fluid, follow
the manufacturer's instructions for adding
water.
Do not mix water with ready-to-use washer fluid.
Water can cause the solution to freeze and
damage your washer fluid tank and other parts
of the washer system. Also, water does not
clean as well as washer fluid.
Fill the washer fluid tank only three-quarters full
when it is very cold. This allows for fluid
expansion if freezing occurs, which could
damage the tank if it is completely full.
Do not use engine coolant (antifreeze) in your
windshield washer. It can damage the vehicle's
windshield washer system and paint.
5-41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Suburban 2008

Table of Contents