Parallel Port Mode - MSI MS-6137 User Manual

CHAPTER 3 CHAPTER 3 CHAPTER 3
CHAPTER 3 CHAPTER 3
Onboard Parallel Port
Disabled
(3BCH/IRQ7)/
(278H/IRQ5)/
(378H/IRQ7)
Disable
3BCH/IRQ7 Line Printer port 0
278H/IRQ5
378H/IRQ7

Parallel Port Mode

SPP : Standard Parallel Port
EPP : Enhanced Parallel Port
ECP : Extended Capability Port
SPP/EPP/ECP/
ECP+EPP
There is a built-in parallel port on the
on-board Super I/O chipset that pro-
vides Standard, ECP, and EPP features.
It has the following options:
Line Printer port 2
Line Printer port 1
To operate the onboard parallel port as
Standard Parallel Port only, choose
"SPP." To operate the onboard parallel
port in the EPP modes simultaneously,
choose "EPP." By choosing "ECP", the
onboard parallel port will operate in ECP
mode only. Choosing "ECP + EPP" will
allow the onboard parallel port to
support both the ECP and EPP modes
simultaneously. The ECP mode has to
use the DMA channel, so choose the
onboard parallel port with the ECP
feature. After selecting it, the following
message will appear: "ECP Mode Use
DMA" At this time, the user can
choose between DMA
3-19
AWARD AWARD AWARD BIOS SETUP BIOS SETUP BIOS SETUP
AWARD AWARD BIOS SETUP BIOS SETUP
®