License Plate Lamp
To replace one of these bulbs, do the following:
1. Remove the two screws holding each of the
license plate lamps.
2. Turn and pull the license plate lamp toward
you through the opening.
3. Turn the bulb socket counterclockwise and pull
the bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the
license plate lamp.
332
Replacement Bulbs
Exterior Lamps
Back-Up Lamps
Center High-Mounted
Stoplamp (CHMSL)
Front Parking/Turn Signal Lamps
Halogen Headlamps,
High/Low-Beam
License Plate Lamp and
Sidemarker
Stoplamp, Taillamp and Turn
Signal Lamps
For replacement bulbs not listed here, contact
your dealer.
Bulb Number
921
912
3157KX
9007 LL
194
3057KX