Prerequisites Operating modes Preparing hard drives for video recording 8.4.1 Configuring hard drives using the MegaRAID Storage Manager application 8.4.2 Recovering the unit Additional documentation and client software Bosch Security Systems B.V. 2021.10 | V02 | DOC Quick installation guide...
The Low Voltage power supply unit must comply with EN/UL 60950. The power supply must be a SELV-LPS unit or a SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power Source). 2021.10 | V02 | DOC Bosch Security Systems B.V. Quick installation guide...
Page 5
Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners. – Do not install device near any heat sources such as radiators, heaters, stoves, or other equipment (including amplifiers) that produce heat. Bosch Security Systems B.V. 2021.10 | V02 | DOC Quick installation guide...
Page 6
16 A. This must be in accordance with NEC800 (CEC Section 60). – Disconnect the power before moving the unit. Move the unit with care. Excessive force or shock may damage the unit and the hard disk drives. 2021.10 | V02 | DOC Bosch Security Systems B.V. Quick installation guide...
SELV circuits. – If safe operation of the unit cannot be ensured, remove it from service and secure it to prevent unauthorized operation. In such cases, have the unit checked by Bosch Security Systems. –...
Notice! Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of losing information, we recommend multiple, redundant recording systems, and a procedure to back up all analog and digital information.
DIVAR IP all-in-one 7000 2U Safety | en Disposal Your Bosch product has been developed and manufactured using high-quality materials and components that can be reused. This symbol means that electronic and electrical devices that have reached the end of their working life must be disposed of separately from household waste.
OS security updates. – Limiting local network access to trusted devices is strongly suggested. Details are described in the Technical note Network Authentication 802.1X and in the Bosch IP Video and Data Security Guidebook, available in the online product catalog. –...
DIVAR IP all-in-one 7000 2U Rack mount kit Quick installation guide (English) Registration leaflet Power cord EU Power cord US QUERTY USB keyboard USB mouse Product registration Please register your product: https://www.boschsecurity.com/product-registration/ Bosch Security Systems B.V. 2021.10 | V02 | DOC Quick installation guide...
3 USB ports 3.1 Gen 2 (Type A) USB port 3.1 Gen 2 (Type C) 2 LAN ports (teamed) Note: Do not change the teaming mode! VGA display output (disabled) DVI-I port 2021.10 | V02 | DOC Bosch Security Systems B.V. Quick installation guide...
Page 13
This LED indicates network activity on GLAN2 when flashing. NIC2 This LED indicates network activity on GLAN1 when flashing. NIC1 Bosch Security Systems B.V. 2021.10 | V02 | DOC Quick installation guide...
Page 14
The system power supply temperature has reached 63 °C. The system will automatically turn off when the power supply temperature reaches 70 °C and restart when the power supply temperature goes below 60 °C. 2021.10 | V02 | DOC Bosch Security Systems B.V. Quick installation guide...
– Allow the hard drives and power supply modules to cool before touching them. Bosch Security Systems B.V. 2021.10 | V02 | DOC Quick installation guide...
A reliable ground must be maintained at all times. To ensure this, the rack itself should be grounded. Particular attention should be given to power supply connections other than the direct connections to the branch circuit (i.e. the use of power strips, etc.). 2021.10 | V02 | DOC Bosch Security Systems B.V. Quick installation guide...
Locate the rail assembly in the chassis packaging. Extend the rail assembly by pulling it outward. Press the quick-release tab. Separate the inner rail extension from the outer rail assembly. Bosch Security Systems B.V. 2021.10 | V02 | DOC Quick installation guide...
Hang the hooks of the rails onto the rack holes and if desired, use screws to secure the front of the outer rail onto the rack. Repeat steps 1-3 for the remaining outer rail. 2021.10 | V02 | DOC Bosch Security Systems B.V. Quick installation guide...
Push the chassis completely into the rack and make sure that it clicks into the locked position. Optionally, use screws to secure the front of the chassis to the rack. Bosch Security Systems B.V. 2021.10 | V02 | DOC Quick installation guide...
Page 20
Make sure that the brackets are positioned with just enough space to fit the width of the Telco rack. Slide the chassis into the rack and tighten the brackets to the rack. 2021.10 | V02 | DOC Bosch Security Systems B.V. Quick installation guide...
Installing a hard drive into a hard drive carrier To install a hard drive into a hard drive carrier: Remove the screws which secure the dummy drive to the hard drive carrier. Bosch Security Systems B.V. 2021.10 | V02 | DOC Quick installation guide...
Page 22
SATA hard drive Notice! Bosch recommends using the respective Bosch hard disk drives. The hard disk drives as one of the critical component are carefully selected by Bosch based on available failure rates. Hard disk drives not delivered from Bosch are not supported.
Push the hard drive carrier into the bay until the handle retracts and the hard drive clicks into the locked position. Bosch Security Systems B.V. 2021.10 | V02 | DOC Quick installation guide...
Plug the power cord from the power supply unit into a high-quality power strip that offers protection from electrical noise and power surges. Bosch recommends to use an uninterruptible power supply (UPS). Push the power button on the control panel to turn on the system.
This mode allows for advanced video management features such as event and alarm handling. – Pure video recording system, utilizing the VRM core components and services. Bosch Security Systems B.V. 2021.10 | V02 | DOC Quick installation guide...
10. In the RAID level: list, select RAID5. 11. In the Select unconfigured drives: list, select the respective hard drives and click Add>. The selected drives are displayed in the Drive groups: box. 2021.10 | V02 | DOC Bosch Security Systems B.V. Quick installation guide...
Windows performs the initial setup of the operating system. After Windows has completed the setup, the unit restarts. After the restart of the unit, the factory settings are installed. Bosch Security Systems B.V. 2021.10 | V02 | DOC Quick installation guide...
You can find the latest software and available upgrade packages in the Download Area of Bosch Security and Safety Systems under: https://downloadstore.boschsecurity.com/ 2021.10 | V02 | DOC Bosch Security Systems B.V.
Page 29
DIVAR IP all-in-one 7000 2U Additional documentation and client software | Bosch Security Systems B.V. 2021.10 | V02 | DOC Quick installation guide...
Page 30
| Additional documentation and client software DIVAR IP all-in-one 7000 2U 2021.10 | V02 | DOC Bosch Security Systems B.V. Quick installation guide...