5
Media access indicator
Light is amber when reading or writing data to a memory card reader.
6
Power indicator (VAIO)
Light is white when the computer is on. The light turns off when the computer is in Standby mode or turned off.
7
Optical drive 1 eject button
Ejects a disc from Optical drive 1.
8
Optical drive 2 eject button
Ejects a disc from Optical drive 2.
9
i.LINK 4-pin S400 port (IEEE 1394)
Connection for a compatible digital device.
10
Universal Serial Bus (USB 2.0) ports (2)
Connections for compatible high/full/low-speed USB devices.
11
Memory Stick
memory card reader
®
Reads and writes data from and to Memory Stick
12
Secure Digital (SD)/MultiMediaCard
Reads and writes data from and to a Secure Digital (SD) or MultiMediaCard
13
Hard disk drive access indicator
Light is amber while the hard disk drive is reading and writing data.
14
Power button
The power button turns the computer on/off.
15
Standby indicator
Light is amber when the computer is placed in Standby mode.
T he media ac c es s indic ator lights when reading or writing data with the Sec ure Digital (SD), M emory Stic k
1
C ompac tFlas h
/M ic rodrive
®
i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The i.LINK
connection may vary, depending on the software programs, operating system, and compatible i.LINK devices. All products
1
s lots .
, Memory Stick Pro , and Memory Stick Duo
®
(MMC) memory card reader
media.
(MMC).
, SmartM edia , xD-P ic ture C ard , or
®
Page 9
Need help?
Do you have a question about the VGC-RB50 User Guide (primary user manual) and is the answer not in the manual?
Questions and answers