Connecting A Display (Monitor) - Sony VGC-RB50 User Guide (primary user manual) User Manual

Connecting a Display (Monitor)

The location, availability, and type of the monitor port may vary, depending on the model purchased. See the specifications
sheet for your computer on the Sony Online Support Web site at http://www.sony.com/pcsupport, for details about your
computer's hardware configuration
1.
Plug the display's cable into the appropriate monitor port.
2.
If necessary, plug the display's cable into the rear of the display.
To connect a display
Install your equipment so that you can easily reach the power outlet in the event of an emergency.
Page 30