Table of Contents
Advertisement
Flame blows out on low setting
or has uneven heat distribution
Low heat with the knob on
"HIGH"
Appliance is too hot
Flame behind control panel or
control knob area
Fire at any connection
•
Check for spider webs or insect nest.
•
Cold appliance needs to be preheated for 5 minutes on high
setting.
•
Cold and windy weather will require you to move appliance
away from the wind.
•
Lack of fuel. Check to see cylinder valve is open and cylinder
has fuel.
•
Check to see if the fuel hose is bent or kinked.
•
Make sure the appliance area is clear of dust.
•
Check your gas supply and gas pressure.
•
If it is only one burner that appears low, make sure the orifice or
burner is clean.
•
Excess grease build-up causing grease fires.
•
Damaged or faulty regulator.
Replace with factory authorized parts.
•
Cook on a lower temperature setting.
IMMEDIATELY shut off cylinder valve and allow grill to cool.
•
heck for spider webs or insect nest.
C
•
Gas is leaking from a faulty connection. Tighten connections
with an adjustable wrench and replace damaged parts. Perform
a leak test on all connections before cooking on appliance
again.
IMMEDIATELY shut off cylinder valve and allow appliance to
cool.
•
Gas is leaking from a faulty connection. Tighten connections
with an adjustable wrench and replace damaged parts.
•
Perform a leak test on all connections before cooking on
appliance again.
Page | 20
Advertisement
Table of Contents
