Advertisement
PREFACE
Thank you for purchasing the LQFP-120P*
ber: MB2198-701-E).
This product is a header used in the adapter unit for connecting a DSU-FR emulator (model number:
MB2198-01)*
120P).
This manual describes how to use the LQFP-120P header type6 for the DSU-FR emulator. Please
read the manual carefully before using this product.
Please contact sales or support representative for details on the production and evaluation MCU
models that can be used with this product.
*1 : The package is the FPT-120P-M21 (lead pitch: 0.5mm, body size: 16.0mm × 16.0mm).
*2 : FR, the abbreviation of FUJITSU RISC controller, is a line of products of FUJITSU Limited.
*3 : Referred to below as the "emulator"
■ Handling and Usage Procedures
Refer the to following manuals for details on handling procedures, usage procedures, and warnings
for using the product safely.
■ European RoHS support
Products with a -E suffix on the part number are European RoHS compliant products.
■ Notice on this document
All information included in this document is current as of the date it is issued. Such information is
subject to change without any prior notice.
Please confirm the latest relevant information with the sales representatives.
■ Cautions of the Products Described in this Document
The following precautions apply to the product described in this manual.
CAUTION
Cuts
Damage
Damage
3
to a user system that uses a Fujitsu FR family microcontroller MB91F662 (LQFP-
• DSU-FR EMULATOR MB2198-01 HARDWARE MANUAL
• DSU-FR EMULATOR MB2198-700-E BGA-480P ADAPTER OPERATION MANUAL
Indicates a feature that, if not used correctly, may result in minor or moderate inju-
ries, and which may cause the customer system to malfunction.
The product contains sharp edges that are left unavoidably exposed, such as jump-
er plugs. Handle the product with due care not to get injured with such pointed parts.
When connecting the header board to the user system, correctly position the index
mark (▲) on the NQPACK mounted on the user system with the index mark (▲) on
the header board, otherwise the emulator and user system might be damaged.
When mounting a mass production MCU, correctly position pin 1, otherwise the
mass production MCU and user system might be damaged.
1
header type6 for the DSU-FR*
i
2
emulator (model num-
Advertisement
