Testing The Alarm; Disarming The System - Chevrolet 2004 Corvette Owner's Manual

Table of Contents

Advertisement

Testing the Alarm

To test the system, do the following:
1. Make sure the hatch/trunk lid is latched.
2. Lower the window on the driver's door.
3. Manually arm the system.
4. Close the doors and wait 15 seconds.
5. Reach through the open window and manually
unlock the driver's door.
6. Open the door. The alarm should sound.
7. Turn off the alarm.
If the alarm is inoperative, check to see if the horn
works. If not, check the horn fuse. See Fuses and
Circuit Breakers on page 5-93. If the horn works,
but the alarm does not go off, see your dealer.

Disarming the System

Always use your key or the remote keyless entry
transmitter to unlock a door. Unlocking a door any other
way will set off the alarm. If your alarm sounds, listed
below are the ways you can disarm it.
Unlock the driver's door with your key.
Put the key in the ignition.
Press the unlock button on the remote keyless
entry transmitter.
2-17

Advertisement

Table of Contents
loading

Table of Contents