Back-Up Lamps; Windshield Wiper Blade Replacement - Chevrolet 2004 Corvette Owner's Manual

Table of Contents

Advertisement

Back-Up Lamps

You can access the back-up lamps through the inboard
taillamp opening. See Taillamps and Turn Signal Lamps
on page 5-50.
1. Squeeze the tab on the socket while turning it
counterclockwise to remove it from the assembly.
2. Remove the bulb from the socket.
3. Reverse the steps listed previously with a new bulb.
Replacement Bulbs
Exterior Lamp
High-Beam Headlamp
Low-Beam Headlamp
Back-Up
Rear Stop/Tail and Turn Signal
For any bulb replacements or procedures not listed
here, please consult your dealer.
5-52
Windshield Wiper Blade
Replacement
Windshield wiper blades should be inspected each time
maintenance is performed. See "Wiper Blade Check"
under Scheduled Maintenance on page 6-4 for
more information.
Replacement blades come in different types and are
removed in different ways. For the proper type and
length, see Normal Maintenance Replacement Parts
on page 6-13.
Bulb Number
It is a good idea to clean or replace the wiper blade
assembly every six months.
9005
Notice: Allowing the wiper blade arm to touch the
9006
windshield when no wiper blade is installed
could damage the windshield. Any damage that
2057
occurs would not be covered by your warranty.
3057
Do not allow the wiper blade arm to touch the
windshield.

Advertisement

Table of Contents
loading

Table of Contents