Power Steering Fluid; How To Check Power Steering Fluid - Chevrolet 2004 Corvette Owner's Manual

Table of Contents

Advertisement

Power Steering Fluid

When to Check Power Steering Fluid
It is not necessary to regularly check power steering fluid
unless you suspect there is a leak in the system or
you hear an unusual noise. A fluid loss in this system
could indicate a problem. Have the system inspected
and repaired. See Engine Compartment Overview
on page 5-12 for reservoir location.

How to Check Power Steering Fluid

Turn the key off, let the engine compartment cool down,
wipe the cap and the top of the reservoir clean, then
unscrew the cap and wipe the dipstick with a clean rag.
Replace the cap and completely tighten it. Then remove
the cap again and look at the fluid level on the dipstick.
There are markings on both sides of the dipstick.
The level should be at the FULL COLD mark.
If necessary, add only enough fluid to bring the
level up to the mark.
What to Use
To determine what kind of fluid to use, see
Recommended Fluids and Lubricants on page 6-11.
Always use the proper fluid. Failure to use the proper
fluid can cause leaks and damage hoses and seals.
When the engine
compartment is hot,
the level should be at
the HOT mark.
When the engine
compartment is cool,
the level should be at
the FULL COLD mark.
5-35

Advertisement

Table of Contents
loading

Table of Contents