Table of Contents
Advertisement
Installaion
1.
Turn off your computer and unplug your computer's power cord.
2.
Connect the signal cable to the HDMI (optional) and /or VGA
(optional) and /or DisplayPort (optional) input socket of the monitor,
and the HDMI (optional) and /or VGA (optional) and /or DisplayPort
(optional) output socket of the graphics card on the computer. Then
tighten the thumbscrews on the signal cable connector.
3.
Optional: Connect the audio input socket (AUDIO IN) of the LCD
monitor and the line-out port on the computer with the audio cable.
4.
Insert the monitor power cable into the power port at the back of the
monitor.
5.
Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
1-4
Chapter 1: Product Introduction
Advertisement
Table of Contents
