Lenovo ThinkPad E580 User Manual page 115

5. Loosen the two screws that secure the bracket
solid-state drive out of the slot
6. Insert the new M.2 solid-state drive into the slot at an angle of about 20 degrees
solid-state drive downward
screws 5 .
7. Reinstall the base cover assembly.
8. Turn the computer over. Connect the ac power adapter and all cables to the computer.
1 and remove the bracket
3
.
2 . Then reinstall the bracket into place as shown
2 . Then remove the M.2
1
and pivot the M.2
3 4 and tighten the
.
Chapter 9 Replacing devices
97