Playing Records - Technics SL-100C Operating Instructions Manual

Playing records

Preparation
1 Put a record (not included) on the turntable.
2 Take off the stylus cover and release the arm clamp.
1
Press [ ] to turn the unit on.
33-1/3 rpm is automatically selected and
the indicator [33] lights.
Attention
 Do not press [START-STOP] when the turntable is removed.
If you have accidentally pressed [START-STOP]
·The indicator of the speed select button ([33] or [45]) starts blinking.
 If it is blinking, press [
the unit on.
 Turn the unit on or off with the volume on the connected device set to the minimum.
1
2
Speed select buttons
Indicators

Removing the stylus cover
Remove the stylus cover by sliding it straight and slowly in the cartridge
front direction while taking care not to damage the stylus.

Attaching the stylus cover
Hold the stylus cover firmly from both sides, align with the front of the cartridge,
and attach by sliding it slowly while taking care not to damage the stylus.
18
(18)
English
Indicator
] to turn the unit off, fit the turntable and then press [
Centre spindle
1
2
Press [START-STOP].
The turntable starts revolving.
2
2
] to turn
3
·
Cartridge
Stylus cover
4