Before First Use - Zanussi ZCG660GNC User Manual

Cooking surface layout
1
5
4
Cooker control panel
1 2 3
Accessories
• Wire shelf
For cookware, cake tins, roasts.
• Grill- / Roasting pan
To bake and roast or as pan to collect fat.

Before first use

WARNING!
Refer to Safety chapters.
Initial Cleaning
Remove all accessories from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance before first use.
Put the accessories back to their initial position.
Setting the time
You must set the time before you operate the
oven.
When you connect the appliance to the
electrical supply or after a power cut, the
indicator for the Time of Day function flashes.
www.zanussi.com
2
3
4 1
Steam outlet - number and position depend
1
on the model
Semi-rapid burner
2
Auxiliary burner
3
Rapid burner
4
Semi-rapid burner
5
Knobs for the hob
1
Knob for the main oven
2
Electronic programmer
3
Knob for the top oven
4
• Trivet
For roasting and grilling.
Use the trivet only with the Grill- /
roasting pan.
Press the or to set the correct time.
After approximately five seconds, the flashing
stops and the display shows the time of day.
To change the time, press
until the indicator for the Time of Day function
flashes.
Preheating
Preheat the empty appliance before first use.
Preheat the two ovens. Heat up one
oven at a time.
1. Set the maximum temperature.
2. Let the appliance operate for 1 hour.
Accessories can become hotter than usual. The
appliance can emit an odour and smoke. This is
normal. Make sure that the airflow is sufficient.
again and again
7