Figure 70. Removing the heat sink
Figure 71. Installing the heat sink
4. Complete the replacement. See "Completing the parts replacement" on page 58.
Replacing the memory module
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
If your computer supports one memory module, install the module into the DIMM 1 slot. If your computer
supports two memory modules, install one memory module into the DIMM 1 slot first and then install the
other into the DIMM 2 slot.
1. Remove the monitor stand. See "Replacing the monitor stand" on page 20.
2. Remove the LCD panel. See "Removing the LCD panel" on page 22.
3. Replace the memory module.
.
Chapter 4
Replacing hardware
41