Section 4 - Operating Instructions; Controls And Instrument Identification - Scag Power Equipment Liberty Z SZL36-18FR Operator's Manual

R
WARNING
Do not attempt to operate this mower unless you
have read this manual. Learn the location and
purpose of all controls and instruments before
you operate this mower.
4.1 CONTROLS AND INSTRUMENT
IDENTIFICATION
Before operating the mower, familiarize yourself with all
mower and engine controls. Knowing the location, function
and operation of these controls is important for safe and
efficient operation of the mower.
PARKING
BRAKE
LEFT STEERING
CONTROL
DUMP VALVE
OPERATING INSTRUCTIONS
DECK LIFT
DUMP VALVE
Figure 4-1. Controls and Instruments
1. Ignition Switch (Figure 4-1). The ignition switch
is used to start the engine and has three positions;
OFF, ON, and START.
2. Mower Deck Switch (Figure 4-1). Used to engage
and disengage the mower drive system. Pulling up
on the switch will engage the deck drive. Pushing
down on the switch will disengage the deck drive.
3. Engine Choke Control (Figure 4-1). Used to start
a cold engine.
4. Engine Throttle Control (Figure 4-1). Used to
control the engine speed. Pushing the lever forward
increases engine speed. Pulling the lever back
decreases engine speed. Full back position is the
IDLE position. Full forward is the cutting position.
CUTTING HEIGHT
ADJUSTMENT
FUSES
HOUR METER
MOWER
DECK
SWITCH
12
Section 4
RIGHT STEERING
CONTROL
IGNITION
SWITCH
ENGINE
THROTTLE
CONTROL
ENGINE
CHOKE
CONTROL