Table of Contents
Advertisement
Hotel Option menu Item
Welcome Message
Edit Welcome Message
Hospitality Logo
Logo/
Message
Hospitality Logo DL
Logo Display Time
Clone TV to USB
Clone USB to TV
Cloning
Setting Auto Initialize
Network Setup
Network
Apps ID Setting
Apps Setting
Service Discovery
ARP Interval
Description
Displays the welcome message for 60 seconds when the TV turns on.
Edits the welcome message.
Turns the Hospitality Logo function is set to OFF, BMP, AVI, BOTH. If the function is
not set to OFF, the TV is turned on, the logo is displayed, before the signal from the
initial source, for the amount of time set in Logo Display Time.
• The DivX codec is not supported.
You can download the startup logo from the connected USB flash drive.
Hospitality logo file requirements:
• Image or video files only.
• The image file is supported up to 2 MB.
• The video file is supported up to 50 MB.
• File can only be named "samsung_image.*", "samsung_video.*"
Set the time displayed Hospitality Logo. (3/5/7 seconds).
Clone the current TV options to a USB memory device.
Clone the saved TV options on a USB memory device to the TV.
If you set Setting Auto Initialize to On, the TV menu items are restored again to their
values cloned initially when the TV turns off and then on.
If this item is entered into, Network menu is displayed. The Network menu is used for
setting network like internet access.
• Network Status: View the current network and Internet status.
• Soft AP: Turns on or off the Soft AP. When Soft AP is set to on, your mobile devices
can find the TV name in Wi-Fi connection list.
– When the TV connected with wireless network, Soft AP is enabled.
• Security key: Set a security key that you need to enter on other devices so they can
connect to the TV.
• Open Network Settings: Connect to an available network.
– Input the generated security key into the device you want to connect.
– If network does not operate normally,check the security key again. An incorrect
security key may cause a malfunction.
– Soft AP may not be available if it is not supported by the model.
– Maximum number of devices that can be connected: 4 devices.
– Bitrate: 10 Mbps/device.
– The specifications above are based on our in-house testing. Actual performance
may vary depending on your wired/wireless network environment.
The feature to set specific Hotel ID for installing the app of the correspoding hotel in
the Hotel TV.
Enters Samsung App Store for managing current apps and installing new apps in the
Hotel TV.
Can use this feature to enable the function like DLNA.
Adjust the ARP (Address Resolution Protocol) interval value.
• Setting value: 2 / 5 / 10 / 30 / 60 / 120 / 180 second (default: 60 sec)
English - 37
Advertisement
Table of Contents
