Front Turn Signal, Sidemarker and
Parking Lamps
1. Use a small
tool
to unlatch the outboard clip on
this lamp.
2.
Pull the lamp forward to completely unlatch the clip.
3. Remove the lamp from the grille.
4. Squeeze the tab on the side of the bulb assembly
while turning it counterclockwise.
5. Remove the bulb assembly from the back of the
lens and replace the bulb.
Move the lamp outboard to loosen the tabs.
Taillamps
6. Turn the socket clockwise to reinstall it in the lens
assembly.
1. Remove the two inboard nuts on the side assembly.
2. Pull side assembly rearward to clear studs.
3. Rotate side assembly on the outboard side,
4. Slide assembly slightly upward to release lower clip.
5. Reinstall the clips to the side assembly.
6. Remove the three nuts on the taillamp.
7. Remove the taillamp from the vehicle.
releasing the upper clip.
5-56