Rear Seats
Rear Seat Operation
Removing the Rear Seat
1. Disconnect the quick release latch plates for the lap
shoulder belts on the bench seat to be removed. To
do this, press the tip of a key into the release
hole of the safety belt buckle while pulling up on the
safety belt.
There are two pins located on the inboard sides of the
rear seats. If the vehicle has floor mats, the pins
will be located under a flap that has been cut into the
mat.The driver's side pin will have a black cap with
an "I-" marked on it and will look like this:
1 -6