With kind regards Your Beurer team Contents 1. Items included in the package ......11 4.4 Setting the temperature ......14 1.1 Description ..........11...
This product satisfies The products demonstra the requirements of the bly meet the requirements applicable European of the technical Regula and national directives. tions of the EAEU. The device has dou Please dispose of the ble protective insula device in accordance tion and therefore with EC Directive –...
2. Important instructions Retain for future use WARNING • Nonobservance of the following notes may result in personal injury or material damage (electric shock, skin burns, fire). The following safety and hazard information is not only intended to protect your health and the health of others, it should also protect the product.
• The electrical and magnetic fields emitted by this heat pad may inter fere with the function of a pacemaker. However, they are still well below the limits: electrical field strength: max. 5000 V/m, magnetic field strength: max. 80 A/m, magnetic flux density: max. 0.1 millite sla.
4. Operation 4.1 Safety CAUTION • The heat pad is fitted with a SAFETY SYSTEM. This sensor technology provides protection against overheating across the entire surface of the heat pad with an automatic switchoff in the event of a fault. If the SAFETY SYSTEM has switched off the heat pad, the temperature settings are no longer illuminated when switched on.
4.6 Switching off To switch the heat pad off, set the slider for ON/OFF and temperature settings to setting “0” (OFF). The temperature settings are then no longer illuminated. NOTE: If the heat pad is not in use, switch the side slider for ON/OFF to setting “0” (OFF) and unplug the power plug from the socket.
During the warranty period, should this product prove to be incomplete or defective in functionality in accord ance with the following provisions, Beurer shall carry out a repair or a replacement delivery free of charge, in accordance with these warranty conditions.
Page 9
The buyer will then receive further information about the processing of the warranty claim, e.g. where they can send the product and what documentation is required. A warranty claim shall only be considered if the buyer can provide Beurer, or an authorised Beurer partner, with – a copy of the invoice/purchase receipt, and –...
Need help?
Do you have a question about the HK42 and is the answer not in the manual?
Questions and answers