Installing A Memory Module - Sony PCV-W500GN1 VAIO User Guide (primary manual) Specifications

Installing a memory module

1.
Remove the memory module from its anti-static package, handling it by the edges.
2. Locate the notch on the bottom edge of the module and align the module to the open memory module slot.
Installing a m em ory m odule
3.
Firmly insert the bottom edge of the module into the slot.
4.
Press down evenly against the module's upper corners. The side latches snap into position, holding the memory
module in place.
To avoid damaging a memory module or the memory module slot, move the side latches slightly outward to
relieve pressure. The module is properly inserted when the side latches click into place.
Page 80