To Connect The Modem Cable - Sony PCV-W500GN1 VAIO User Guide (primary manual) Specifications
Vaio® desktops: vaio® desktop computer
Hide thumbs
Also See for PCV-W500GN1 VAIO User Guide (primary manual):
- Supplementary manual (9 pages) ,
- Service manual (38 pages) ,
- Service manual (40 pages)
Table of Contents
Advertisement
To connect the modem cable
1.
Unplug your telephone cable from the wall jack.
2.
Insert the telephone cable into one of the RJ-11 jacks on a splitter device (optional).
3.
Insert one end of the modem cable (supplied) into an RJ-11 jack on the splitter device.
4.
Insert the plug end of the splitter device into the wall jack.
5.
Plug the modem cable into the modem line jack on the computer.
To connect the m odem cable
Your computer has a protective sticker
10BASE-T and 100BASE-TX cables to the Ethernet port. Using other cables or a telephone cable may result in an
electric current overload that can cause a malfunction, excessive heat, or fire in the port. For help on connecting to a
network, see your network administrator.
covering the Ethernet port located on the rear panel. Connect only
Page 16
Advertisement
Table of Contents
Need help?
Do you have a question about the PCV-W500GN1 VAIO User Guide (primary manual) and is the answer not in the manual?
Questions and answers