Page 1
VDH doc: 091146 Version v1.0 Date: 16-12-2009 Range: -10/+90 C pro 0,1 C Software: 091180 ALFA D1-DP File: Do091146.wpd * Function. The ALFA(NET) D1-DP is a digital alarm thermostat for wall mounting. The readout is in tenth degrees Celsius and has large 26 mm displays. The unit has two LED indications with 10 mm LED’s one for ‘Alarm’...
Page 2
* Control. The ALFA(NET) D1-DP alarm thermostat can by controlled by four push buttons on the front; - view / change set point. - increase set point. DOWN - decrease set point. RESET ALARM - reset an alarm (Buzzer off). * Viewing set point.
Page 3
* Setting internal parameters. Next to the adjustment of the set point, some other internal settings are possible, sensor- offset, relay function and alarm settings. By pushing the DOWN key more than 5 seconds, you enter the 'internal programming menu'. In the left display the upper and lower segments are blinking.
Page 4
ALFA(NET) D1 DP e.g. 2.1 C to much, the Sensor Offset has to de decreased with 2.1 C. * Technical details. Type : ALFA D1-DP cool/heat thermostat ALFANET D1-DP cool/heat thermostat with network : -10/+90 C, readout per 0,1 C...
Need help?
Do you have a question about the ALFA D1-DP and is the answer not in the manual?
Questions and answers