Brake Adjustment - Chevrolet 2002 TrailBlazer Owner's Manual

Some driving conditions or climates may cause a
brake squeal when the brakes are first applied or lightly
applied. This does not mean something is wrong with
your brakes.
Properly torqued wheel nuts are necessary to help
prevent brake pulsation. When tires are rotated, inspect
brake pads for wear and evenly tighten wheel nuts in
the proper sequence to GM torque specifications.
Brake linings should always be replaced as complete
axle sets.
See "Brake System Inspection" in Section 7 of this
manual under Part C "Periodic Maintenance Inspections."
Brake Pedal Travel
See your dealer if the brake pedal does not return to
normal height, or if there is a rapid increase in pedal
travel. This could be a sign of brake trouble.

Brake Adjustment

Every time you make a brake stop, your disc brakes
adjust for wear.
Replacing Brake System Parts
The braking system on a vehicle is complex. Its
many parts have to be of top quality and work well
together if the vehicle is to have really good braking.
Your vehicle was designed and tested with top
GM brake parts. When you replace parts of your braking
--
system for example, when your brake linings wear
down and you need new ones put in
new approved GM replacement parts. If you don't, your
brakes may no longer work properly. For example, if
someone puts in brake linings that are wrong for your
vehicle, the balance between your front and rear brakes
--
can change for the worse. The braking performance
you've come to expect can change in many other ways
if someone puts in the wrong replacement brake parts.
-
quality
--
be sure you get
6-33