Troubleshooting - Kampa Hottie Operating Manual

Troubleshooting

Fault
Cartridge cannot be installed
No gas supply in MAX position
Smell of gas in OFF position
Low flame
Uneven flame
10
Cause
Control knob not fully turned to
OFF position
Incorrect cartridge installation
No gas left in cartridge
Incorrect cartridge installation
Activated safety device
Control knob malfunction
Clogged nozzle
Incorrect cartridge installation
Control knob malfunction
No gas is left in cartridge
Clogged burner holes
Control knob malfunction
Clogged nozzle
No gas is left in cartridge
Clogged burner holes
4445103365
Solution
Turn the control knob completely to
the OFF position and reset cartridge.
Ensure that the tab on the regulator is
engaged with the notch in the car-
tridge collar.
Replace the gas cartridge.
Ensure that the tab on the regulator is
engaged with the notch in the car-
tridge collar.
Allow the cartridge to cool down.
Contact an authorized technician for
the repair.
Contact an authorized technician for
the repair.
Ensure that the tab on the regulator is
engaged with the notch in the car-
tridge collar.
Contact an authorized technician for
the repair.
Replace the gas cartridge.
Use a metal brush to clean the burner
holes.
Contact an authorized technician for
the repair.
Contact an authorized technician for
the repair.
Replace the gas cartridge.
Use a metal brush to clean the burner
holes.