Step 4: Connecting The Audio Cords - Sony XD-AX10 Service Manual

B If you are connecting to an S VIDEO input jack
Connect the S VIDEO cord (not supplied). You will enjoy high quality images.
C If you are connecting to a monitor, projector, or AV amplifier (receiver)
having component video input jacks (Y, P
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate color reproduction and high quality images.
Green
Blue
Red
When connecting to a wide screen TV
Depending on the disc, the image may not fit your TV screen. If you want to change the aspect
ratio, please refer to page 51.
Note
Connect the player directly to the TV. If you pass the player signals via the VCR, you may not receive a clear
image on the TV screen.
CD/DVD player
Connecting to your TV
A
This connection will use your TV speakers for sound.
CD/DVD player
DIGITAL OUT LINE OUT S VIDEO COMPONENT VIDEO OUT
OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL R-AUDIO-L VIDEO Y P B P R
A
LINE OUT
(yellow)*
(white)
R-AUDIO-L VIDEO
(red)
Audio/video
cord (supplied)
to LINE OUT L/R
(AUDIO)
l : Signal flow
* The yellow plug is used for video signals (page
16).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV's audio
input jack.
, P )
B R
Green
Blue
Red
VCR
TV
Connect
directly
TV
(yellow)*
(white)
(red)
to audio input
,continued

Step 4: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
Components to be connected
TV
• Surround effects: Virtual Surround WIDE (page
42)
Stereo amplifier (receiver) and two speakers
or
MD deck/DAT deck
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 58)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital or DTS** decoder and 6
speakers
• Surround effects:
– Dolby Digital (5.1ch) (page 58)
– DTS (5.1ch) (page 58)
* Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
** "DTS" and "DTS Digital Out" are trademarks
of Digital Theater Systems, Inc.
17 18
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
CD/DVD player
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL
B-2
Coaxial digital
cord (not supplied)
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL
to DIGITAL OUT
(COAXIAL)
to coaxial digital input
[Speakers]
Front (L)
Front (R)
l: Signal flow
19 20
1-4
through .
A D
Connection Your setup (example)
(page 19)
A
(page 20)
B
(page 21)
C
(page 22)
D D
B-1
LINE OUT S VIDEO COMPONENT VIDEO OUT
OUT
R-AUDIO-L
VIDEO Y P B P R
Stereo audio cord
(not supplied)
(white)
or
(red)
to LINE OUT L/R (AUDIO)
(white) (red)
to audio input
Stereo amplifier (receiver)
MD deck/DAT deck
. If the amplifier
B-2 .
B-1
LINE OUT
R-AUDIO-L VIDEO