Chevrolet 2001 Camaro Owner's Manual page 298

Inflation -- Tire Pressure
-
The Tire Loading Information label, which is on the
driver's door, shows the correct inflation pressures for
your tires when they're cold. "Cold" means your vehicle
has been sitting for at least three hours or driven no
more than 1 mile (1.6 km).
If you'll be driving at high speeds (e.g., speeds of
100 mph (160 km/h) or higher), where it is legal, set the
cold inflation pressure to the maximum inflation pressure
shown on the tire sidewall, or to 38 psi (265 kPa),
whichever is lower. See the example below. When you end
-
this high speed driving, return to the cold inflation
pressure shown on the Tire
Example:
You'll find maximum load and inflation pressure
molded on the tire's sidewall, in small letters, near the
rim flange. It will read something like this: Maximum
load 690 kg (1521 lbs.) @ 300 kPa (44 psi) Max. Press.
For this example, you would set the inflation pressure
-
for high speed driving at 38 psi (265 kPa).
6-44
-
Loading Information label.
NOTICE:
Don't let anyone tell you that underinflation or
overinflation is all right. It's not. If your tires
don't have enough air (underinflation), you can
get the following:
D
Too much flexing
D
Too much heat
D
Tire overloading
D
Bad wear
D
Bad handling
D
Bad fuel economy.
If your tires have too much air (overinflation),
you can get the following:
D
Unusual wear
D
Bad handling
D
Rough ride
D
Needless damage from road hazards.