Safepower; Software Overview; Ni-Imaq Driver Software - National Instruments NI Vision PCIe-1433 User Manual And Specifications

Base, medium, and full configuration camera link frame grabber
Hide thumbs Also See for NI Vision PCIe-1433:
Table of Contents

Advertisement

Because the power available through Camera Link cables is limited, PoCL is not
Note
sufficient for high-performance cameras.

Software Overview

NI-IMAQ Driver Software

© National Instruments Corporation

SafePower

The NI 1433 supports PoCL SafePower. SafePower is a protocol that
prevents the frame grabber from attempting to supply power to a
conventional (non-PoCL) camera or through a conventional cable.
Programming the NI 1433 requires the NI-IMAQ driver software to control
the hardware. National Instruments also offers the following application
software packages for analyzing and processing your acquired images.
NI Vision Builder for Automated Inspection—Allows you to
configure solutions to common inspection tasks.
NI Vision Development Module—Provides customized control over
hardware and algorithms.
The following sections provide an overview of the driver and application
software. For detailed information about individual software packages,
refer to the documentation specific to each software package.
The NI 1433 ships with NI Vision Acquisition Software, which includes
the NI-IMAQ driver software. NI-IMAQ has an extensive library of
functions—such as routines for video configuration, continuous and single
shot image acquisition, memory buffer allocation, trigger control, and
device configuration—you can call from the application development
environment (ADE). NI-IMAQ handles many of the complex issues
between the computer and the image acquisition device, such as
programming interrupts and camera control.
NI-IMAQ performs all functions required for acquiring and saving images
but does not perform image analysis. Refer to the
Application Software
NI-IMAQ also provides the interface between the NI 1433 and LabVIEW,
LabWindows
/CVI
NI-IMAQ software kit includes a series of libraries for image acquisition
for LabVIEW, LabWindows/CVI, and Measurement Studio, which
contains libraries for .NET.
section for image analysis functionality.
, or a text-based programming environment. The
1-3
NI PCIe-1433 User Manual and Specifications
Chapter 1
Introduction
National Instruments

Advertisement

Table of Contents
loading

Table of Contents