Chevrolet 1998 Express Van Owner's Manual page 139

A/C:
Use for normal cooling
on
hot days. This setting
cools outside air and directs it through the instrument
panel outlets.
+ ' ,
BI-LEVEL A/C:
Use this setting to divide aifflow
between the heater floor vents and instrument panel
vents. The air conditioning compressor may operate in
this setting
to
cool the air.
+e
-e
VENT:
This setting directs air through the
instrument panel vents.
+H
HEAT
This setting directs air through the heater
floor vents. This setting
is
useful for cold weather.
0
G?
HEAT/DEFROST: Use this setting to divide
aifflow between the heater floor vents and windshield.
DEFROST:
This setting directs air through the
windshield defroster vents. This setting is useful when
you
have fog or ice on the windshield.
Rear Heater (Without Air Conditioning)
If you have a rear heater (without rear air conditioning),
the control switch is located on the instrument panel.
To increase and decrease the flow of heated air to the
rear floor vents, move the switch marked REAR HEAT
to the blower speed you want.
The knob has three speed positions. To increase the flow
of heated air, move the switch toward HIGH. To turn the
fan off, move the switch to OFF.
3-4