Sony PCV-RX891 Online Help Center (VAIO User Guide) User Manual page 60

Replacing the driv e holder (PCV- RX series m odel)
13. Replace the side panel. See
14. Reconnect the power cord to your computer.
To identify additional hard disk space
When you initialize the new hard disk drive, it must be configured as an extended partition in Windows NT file system
(NTFS) format.
1. Log on to Windows
2.
Click Start in the Windows taskbar, then right-click My Computer. A shortcut menu appears.
3.
Select Manage. The Computer Management window appears.
4.
Under the file directory on the right, go to Storage and then select Disk Management.
5.
Right-click on the newly installed, unformatted drive (Disk label identified with red marking), and from the
shortcut menu, select Initialize Disk.
6.
Click on the Unallocated area of the drive and then right-click to display a shortcut menu.
7.
Select New Partition. The New Partition wizard appears.
8. Follow the wizard's instructions to complete the process.
The Windows XP operating system recognizes the new hard disk drive and applies the NTFS format.
®
Replacing the Side
as Administrator.
®
Panel.
Page 60