Windshield Wipers - Chevrolet 1995 Lumina Owner's Manual

Windshield Wipers
You control the windshield
wipers by turning the band
marked WIPER. For a
single wiping cycle, turn the
band to MIST. Hold it there
until the wipers start, then
let go. The wipers will stop
after one cycle.
If
you want
more cycles, hold the band
on MIST longer.
For steady wiping at low speed, turn the band to LO. For
high-speed wiping, turn the band further, to HI. To stop
the wipers, turn the band to OFF.
You can set the wiper speed for a long or short delay
between wipes. This can be very useful in light rain or
snow. Turn the band to choose the delay time. The
closer to LO, the shorter the delay.
Be sure to clear ice and snow from the wiper blades
before using them. If they're frozen to the windshield,
carefully loosen or thaw them. If your blades do become
damaged, get new blades or blade inserts.
Heavy
inbw
O r ice can overload your wiper mdtor. A
circuit breaker will stop the motor until it cools. Clear
2-29