Chevrolet 1995 Lumina Owner's Manual page 231

4. Push the new bulb into the socket and turn it
clockwise.
5. Replace the bulb and socket in the assembly.
Tail/Stop/Turn Signal Lamp
1. Open the trunk. Remove the convenience net if you
have one. Unhook the net from the upper wing nut.
2. Remove the upper
(convenience net)
wing nut, if
equipped.
3. Pull the carpet
away from the rear
of the vehicle.
4. Unscrew the two remaining wing nuts and pull the
assembly from the body carefully.
5. To remove a socket, press the tab, turn the socket
counterclockwise and pull it out.
6 . Pull the bulb out. Do not twist it.
7. Push the new bulb into the socket.
8. Replace the socket in the assembly.
9. Tighten the socket (both kinds) by turning it
clockwise.
10. Install the assembly and the two lower wing nuts.
11. Replace the carpeting.
12. Replace the upper (convenience net) wing nut, if
equipped.
13. Replace the convenience net, if equipped.
6-33