Headlamps
1. Open the hood.
2. Press and turn the base a quarter-turn
(counterclockwise for the driver's side; clockwise
for the passenger's side) and remove it from the
retaining ring by gently pulling it back and away
from the headlamp.
4. Install the electrical connector to the bulb.
5. Install the new bulb by inserting the smallest tab
on the bulb base into the matching notch in the
retaining ring. Turn the bulb a quarter-turn
clockwise until it stops.
6. Close the hood.
Front Park and Turn Signal Lamp
3.
Remove the electrical connector from the bulb by
raising the lock tab and pulling the connector away
from the bulb's plastic base.
1. Open the hood. There is one flap on each side of the
radiator.
6-29