Chevrolet 1995 Lumina Owner's Manual page 116

Finding
a
Station
AM*FM: Press the lower knob to get AM or F M . The
display shows your selection.
TUNE: Turn the lower knob to choose radio stations.
SEEK: Press the forward or backward arrow to go to
the next higher or lower station.
SCAN: Press and hold one of the SEEK arrows, then
press the other SEEK arrow; SCAN will appear in the
display. Use SCAN to listen to stations for a few
seconds. The radio will go to a station, stop for a few
seconds, then go on to the next station. The radio will
scan up or down the radio band, depending on the arrow
you pressed first. Press both
SEEK
arrows or the upper
knob to stop scanning.
Presets: The four pushbuttons let you return to your
favorite stations. You can set up to 14 stations (7 AM
and 7 FM).
1. Press AM-FM to select the band.
2. Find the station you want.
3. Press SET until the word SET appears on the
display.
4. Press and hold one of the four numbered buttons, or
press and hold two side-by-side buttons.
buttons.
5.
The sound will mute. When it returns, release the
Whenever you press that numbered button or pair
of
buttons, the station you set will return.
Setting the Tone
BASS: Slide the lever up or down to increase or
decrease bass. The middle position is a detent.
TREB: Slide the lever up or down to increase or
decrease treble. The middle position is a detent. If a
station is weak or noisy, you may want to decrease
treble.
Adjusting the Speakers
BAL: Turn the control behind the upper knob to move
the sound to the left or right speakers. The middle
position is a detent and balances the speakers.
FADE: Turn the control behind the lower knob to move
the sound to the front or rear speakers. The middle
position is a detent and balances the speakers.
3-6