Table of Contents
Advertisement
VL-SWD272BX/SWD272CX/SWD272CX1/SWD272AZ/VL-WD613CX/VL-WD613CX1
4. Adjust the white balance by R Gain and B Gain.
Select the color to be adjust as below
[F1] (>>): (Select Digit)
[F2] (
), F3 (
): (Change Value)
Press [F4 (DECIDE)]
Adjust the white balance as below
[F1] (>>): (Select Digit)
[F2] (
), F3 (
): (Change Value)
•to red: R Gain > 03e0
•to blue: R Gain < 03e0
•to yellow: B Gain < 0410
•to green: R Gain < 03e0 and B Gain < 0410
5. Press [TALK].
6. Press [F1 (BACK)].
7. Press [F1 (RESET)].
11.1.2.3. Apartment mode
This setting is generally the door station to connect, you can decide whether you want to connect to large apartment intercom.
Usually, please use remains of House mode.
n Entering Apartment mode:
1. [TALK] + [OFF] + [PAGE] keys are pressed and Power is on.
Function Menu
House mode
Apartment mode
n In order to exit Apartment Mode:
1. Press the [OFF] button.
11.2. Door Station
When replacing the main board of Door Station, please confirm the following operations.
1. When you push the call button, a call reaches the main monitor station and a picture is displayed on the main monitor station.
2. When you press the button during calling, a second call reaches the main monitor station.
3. When the main monitor station is in call status, you can talk.
Selection: Display, [Don't display]
Display: Use only when connecting the lobby doorphone station in House mode (for example VL-
V590).
It is used when connecting to the "Video Intercom System for Apartment Complexes".
It switches automatically to Apartment mode in the communication settings from the PC tool. Please
use when switching manually.
For more information, please refer to the large apartment intercom system documentation.
Settings and Overview
76
Hide quick links:
Advertisement
Table of Contents
